i2c-th-config.h

 
/*********************************************************************
Copyright (C) 2022  Marco Baldinetti <m.baldinetti@digiteco.it>
authors:
Paolo patruno <p.patruno@iperbole.bologna.it>
Marco Baldinetti <m.baldinetti@digiteco.it>
 
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
**********************************************************************/
 
#ifndef _I2C_TH_CONFIG_H
#define _I2C_TH_CONFIG_H
 
#include <sensors_config.h>
 
/*********************************************************************
* MODULE
*********************************************************************/
#define MODULE_MAIN_VERSION                           (3)
 
#define MODULE_MINOR_VERSION                          (19)
 
#define MODULE_CONFIGURATION_VERSION                  (2)
 
#define MODULE_TYPE                                   (STIMA_MODULE_TYPE_TH)
 
/*********************************************************************
* CONFIGURATION
*********************************************************************/
#define CONFIGURATION_DEFAULT_IS_ONESHOT              (false)
 
#define CONFIGURATION_DEFAULT_I2C_ADDRESS             (I2C_TH_DEFAULT_ADDRESS)
 
#define CONFIGURATION_RESET_PIN                       (8)
 
#define TH_POWER_PIN                                  (5)
#define SDCARD_CHIP_SELECT_PIN 7
 
#define SPI_SPEED SD_SCK_MHZ(4)
 
/*********************************************************************
* POWER DOWN
*********************************************************************/
#define USE_POWER_DOWN                                (true)
 
#define DEBOUNCING_POWER_DOWN_TIME_MS                 (10)
 
#define USE_TIMER_1                                   (true)
 
/*********************************************************************
* WATCHDOG
*********************************************************************/
#define WDT_TIMER                                     (WDTO_8S)
 
 
 
/*********************************************************************
* SENSORS
*********************************************************************/
 
#define SENSOR_ERROR_COUNT_MAX                        (20)
 
/*********************************************************************
* HUMIDITY AND TEMPERATURE SENSORS
*********************************************************************/
 
#define OBSERVATIONS_MINUTES                 (1)
 
  // observations with processing every 1-10 minutes (minutes for processing sampling)
// report every 5-60 minutes (> OBSERVATIONS_MINUTES)
 
#define SENSORS_SAMPLE_TIME_MS                    (4000)
 
 
#define SAMPLES_COUNT_MAX                         (((OBSERVATIONS_MINUTES * 60000UL) / SENSORS_SAMPLE_TIME_MS) + 10)
 
#define OBSERVATION_SAMPLES_COUNT                 (((OBSERVATIONS_MINUTES * 60000UL) / SENSORS_SAMPLE_TIME_MS ))
 
 
//\def OBSERVATION_COUNT
//\brief Observations buffer length.
//*/
//#define OBSERVATION_COUNT                    (STATISTICAL_DATA_COUNT * 25)
 
 
#define OBSERVATION_SAMPLE_ERROR_MAX                  ((uint16_t)(round(OBSERVATION_SAMPLES_COUNT/10.))+1)
 
 
#define RMAP_REPORT_ERROR_MAX                         ((uint16_t)(1))
#define RMAP_REPORT_VALID_MIN                         ((uint16_t)(2))
 
 
 
/*********************************************************************
* TIMER1
*********************************************************************/
#define TIMER1_INTERRUPT_TIME_MS                      (SENSORS_SAMPLE_TIME_MS)
 
#define TIMER1_TCNT1_VALUE                            (0xFFFFUL - (TIMER1_INTERRUPT_TIME_MS*1000UL/(1024 / (F_CPU/1000000)))+1)
 
#define TIMER1_VALUE_MAX_MS                           (TIMER1_INTERRUPT_TIME_MS * 3)
 
/*********************************************************************
* TASKS
*********************************************************************/
#define SENSORS_RETRY_COUNT_MAX                       (3)
 
#define SENSORS_RETRY_DELAY_MS                        (50)
 
#define TRANSACTION_TIMEOUT_MS                       (5000)
 
 
#endif