#include <sensors_config.h>

Include dependency graph for i2c-leaf-config.h:

This graph shows which files directly or indirectly include this file:

Macros
#define	MODULE_MAIN_VERSION (3)
	Module major version.

#define	MODULE_MINOR_VERSION (18)
	Module major version.

#define	MODULE_CONFIGURATION_VERSION (1)
	Module version of compatibile configuration. If you change it, you have to reconfigure.

#define	MODULE_TYPE (STIMA_MODULE_TYPE_LEAF)
	Type of module. It is defined in registers.h.

#define	CONFIGURATION_DEFAULT_IS_ONESHOT (false)
	Oneshot mode for default.

#define	CONFIGURATION_DEFAULT_IS_CONTINUOUS (true)
	Continuous mode for default.

#define	CONFIGURATION_DEFAULT_I2C_ADDRESS (I2C_LEAF_DEFAULT_ADDRESS)
	Default i2c address.

#define	CONFIGURATION_DEFAULT_LEAF_CALIBRATION_THRESHOLD (512)
	Default threshold for ADC wet/dry (0-1023).

#define	CONFIGURATION_RESET_PIN (8)
	Input pin for reset configuration at startup.

#define	LEAF_POWER_PIN (2)
	Output pin for power on and power off leaf sensor.

#define	LEAF_ANALOG_PIN (A0)
	Input pin for reading leaf sensor value.

#define	SDCARD_CHIP_SELECT_PIN 7
	Chip select for SDcard SPI.

#define	SPI_SPEED SD_SCK_MHZ(4)
	Clock speed for SPI and SDcard.

#define	I2C_MAX_TIME (600)
	Max i2c time in seconds before i2c restart.

#define	USE_POWER_DOWN (true)
	Enable or disable power down.

#define	DEBOUNCING_POWER_DOWN_TIME_MS (10)
	Debounce power down ms.

#define	USE_TIMER_1 (true)
	Enable or disable timer1.

#define	USE_LEAF_POWER_DOWN (true)
	Enable or disable power down for leaf sensor.

#define	WDT_TIMER (WDTO_8S)
	Watchdog timer for periodically check microprocessor block states. More...

#define	SENSORS_SAMPLE_TIME_MS (4000)
	Milliseconds for sampling sensors: 1000 - 60000 [ms] must be integer multiple of TIMER1_INTERRUPT_TIME_MS !!!

#define	TIMER1_INTERRUPT_TIME_MS (2000)
	Value in milliseconds for generating timer1 interrupt: 100 - 8000 [ms].

#define	TIMER1_TCNT1_VALUE ((uint16_t)(0xFFFF - (float)(1.0 * 0xFFFF * TIMER1_INTERRUPT_TIME_MS / TIMER1_OVERFLOW_TIME_MS)))
	Timer1 timer overflow with 1024 prescaler at 8 MHz.

#define	TIMER_COUNTER_VALUE_MAX_MS (SENSORS_SAMPLE_TIME_MS)
	Maximum timer1 counter value for timed tasks.

#define	LEAF_VALUES_READ_DELAY_MS (2)
	Reading delay from measure to get one data.

#define	LEAF_READ_COUNT (10)
	Maximum number of leaf reading to get one data.

#define	TRANSACTION_TIMEOUT_MS (5000)
	Timeout for command transaction.

Macro Definition Documentation

◆ WDT_TIMER

#define WDT_TIMER (WDTO_8S)

Watchdog timer for periodically check microprocessor block states.

Possible value for WDT_TIMER are: WDTO_15MS, WDTO_30MS, WDTO_60MS, WDTO_120MS, WDTO_250MS, WDTO_500MS, WDTO_1S, WDTO_2S, WDTO_4S, WDTO_8S

Macros

Macro Definition Documentation

◆ WDT_TIMER