mqtt_config.h File Reference

Go to the source code of this file.

Macros
#define	MQTT_ROOT_TOPIC_LENGTH   (50)
	Length in bytes for mqtt root topic.
#define	MQTT_MAINT_TOPIC_LENGTH   (MQTT_ROOT_TOPIC_LENGTH)
	Length in bytes for mqtt maint topic.
#define	MQTT_RPC_TOPIC_LENGTH   (MQTT_ROOT_TOPIC_LENGTH)
	Length in bytes for mqtt rpc topic.
#define	MQTT_SENSOR_TOPIC_LENGTH   (38)
	Length in bytes for mqtt sensor topic.
#define	MQTT_CLIENT_ID_LENGTH   (MQTT_ROOT_TOPIC_LENGTH)
	Length in bytes for mqtt client id.
#define	MQTT_MESSAGE_LENGTH   (100)
	Length in bytes for mqtt message.
#define	MQTT_RPC_COMMAND_LENGTH   (200)
	Length in bytes for mqtt rpc command message.
#define	MQTT_RPC_RESPONSE_LENGTH   (80)
	Length in bytes for mqtt rpc response message.
#define	MQTT_PACKET_SIZE   (220)
	Length in bytes for max mqtt packet size.
#define	MQTT_SERVER_LENGTH   (30)
	Length in bytes for mqtt server.
#define	MQTT_USERNAME_LENGTH   (30)
	Length in bytes for mqtt username.
#define	MQTT_PASSWORD_LENGTH   (30)
	Length in bytes for mqtt password.
#define	STATIONSLUG_LENGTH   (30)
	Length in bytes for station slug.
#define	BOARDSLUG_LENGTH   (30)
	Length in bytes for board slug.
#define	MQTT_TIMEOUT_MS   (6000)
	Timeout in milliseconds for mqtt stack.
#define	MQTT_DEFAULT_SERVER   ("rmap.cc")
	Default MQTT server.
#define	MQTT_DEFAULT_PORT   (1883)
	Default MQTT server port.
#define	MQTT_DEFAULT_ROOT_TOPIC   ("test")
	Default MQTT root topic.
#define	MQTT_DEFAULT_MAINT_TOPIC   ("test")
	Default MQTT maint topic.
#define	MQTT_DEFAULT_RPC_TOPIC   ("test")
#define	MQTT_DEFAULT_USERNAME   ("")
	Default MQTT username.
#define	MQTT_DEFAULT_PASSWORD   ("")
	Default MQTT password.
#define	DEFAULT_STATIONSLUG   ("")
	Default station slug.
#define	DEFAULT_BOARDSLUG   ("")
	Default board slug.
#define	MQTT_STATUS_TOPIC   ("254,0,0/265,0,-,-/B01213")
	Default MQTT status topic for printing on connect/disconnect message.
#define	MQTT_ON_CONNECT_MESSAGE   ("{\"v\":\"conn\",\"s\":%d,\"m\":%d}")
	MQTT on connect message.
#define	MQTT_ON_DISCONNECT_MESSAGE   ("{\"v\":\"disconn\"}")
	MQTT on disconnect message.
#define	MQTT_ON_ERROR_MESSAGE   ("{\"v\":\"error01\"}")
	MQTT on error message.