ethernet_config.h File Reference

Go to the source code of this file.

Macros
#define	ETHERNET_DEFAULT_DHCP_ENABLE   (true)
	Default option for enable or disable DHCP protocol with ethernet.
#define	ETHERNET_DEFAULT_MAC   ("E2:21:B6:44:EB:29")
	Default mac address for ethernet device.
#define	ETHERNET_DEFAULT_IP   ("192.168.0.100")
	Default ip address for ethernet device.
#define	ETHERNET_DEFAULT_NETMASK   ("255.255.255.0")
	Default netmask for ethernet device.
#define	ETHERNET_DEFAULT_GATEWAY   ("192.168.0.1")
	Default gateway for ethernet device.
#define	ETHERNET_DEFAULT_PRIMARY_DNS   ("192.168.0.1")
	Default primary dns for ethernet device.
#define	ETHERNET_DEFAULT_LOCAL_UDP_PORT   (8000)
	Default local udp port for ethernet device.
#define	ETHERNET_ATTEMPT_MS   (2000)
	Set next ethernet library attempt delay in milliseconds after a failure.
#define	ETHERNET_RETRY_TIME_MS   (4000)
	Set next ethernet task attempt delay in milliseconds after a failure.
#define	ETHERNET_RETRY_COUNT   (3)
	Maximum number of retry for ethernet task.
#define	ETHERNET_MQTT_TIMEOUT_MS   (6000)
	MQTT timeout in milliseconds for ethernet device.
#define	ETHERNET_MAC_LENGTH   (6)
	Length in bytes for mac address.
#define	ETHERNET_IP_LENGTH   (4)
	Length in bytes for ip address.